Shrink Wrapping Machines & Automatic Shrink Systems
Side-seal, L-sealer and sleeve shrink wrappers paired with recirculating heat tunnels — for single products, multi-packs and trays that need a tight, tamper-evident PE or POF film at continuous line speed.
What is a shrink wrapping machine?
A shrink wrapper encloses a product in thermoplastic film — usually PE for heavy or bundled goods and POF for retail packs — and then sends it through a heat tunnel where the film shrinks tight to the shape. A sealer closes the film; the BM heat tunnel supplies controlled hot air with a recirculating fan and a variable conveyor, so the film conforms without scorching. The result is a waterproof, tamper-evident pack that holds a multi-pack together and stabilises a tray before palletising.
The SunAura Packaging Machines range is organised by the seal style. Automatic side-seal machines (BTH / BTA) run film continuously and seal along the side, so they handle variable-length products and long multi-packs without a changeover. Fully-auto L-sealers (BTS) cut a flat bag from a centre-folded film and seal on two sides for standard boxes and bundles. Sleeve wrappers (BTX-6040) put a band of film over a tray and tuck the underside, which is the standard approach for bottled water, beverages and tall cartons. Each sealer is matched to a BM tunnel of the correct belt width and shrink capacity.
Shrink wrapping is frequently confused with stretch wrapping and flow wrapping, but they solve different problems. Stretch wrap holds a pallet together; flow wrap makes a sealed pillow-pack around a single item; shrink wrap applies heat and conforms a film skin over the product. If you are not sure which process your product needs, the model pages show the film path and we are happy to confirm before you commit.
The SunAura Packaging Machines shrink wrapper lineup
10 sealer-and-tunnel combinations, from the compact BTA-500S to the high-speed BTH-700 side-seal line and the BTX-6040 sleeve system for trays and bottles.
Automatic side-seal / L-sealer / sleeve shrink wrappers10 models
| Model | Configuration / typical application | ||
|---|---|---|---|
![]() | BTH-1000 + BM-1000L | Automatic Side Seal Shrink Wrapping Machine | View machine → |
![]() | BTA-500S + BM-500L | Automatic Vertical Shrink Wrapping Machine | View machine → |
![]() | BTH-400 + BM-500 | Automatic Side Seal Shrink Wrapping Machine | View machine → |
![]() | BTH-450A + BM-500L | Automatic High-Speed Side Seal Shrink Wrapping Machine | View machine → |
![]() | BTH-550 + BM-500L | Automatic Side Seal Shrink Wrapping Machine | View machine → |
![]() | BTH-700 + BM-700L | Automatic Side Seal Shrink Wrapping Machine for Long Products | View machine → |
![]() | BTS-450A + BM-500 | Automatic L-Bar Sealer Shrink Wrapping Machine | View machine → |
![]() | BTS-450A + BM-500L | Automatic L-Bar Sealer Shrink Wrapping Machine | View machine → |
![]() | BTX-6040 + BM-6040 | Automatic Sleeve Shrink Wrapping Machine | View machine → |
![]() | BTH-400 + BM-500L | Automatic Side Seal Shrink Wrapping Machine | View machine → |
How to choose a shrink wrapper
Three technical facts — product size, film type, and how the pack is fed — select the machine.
Maximum pack dimensions
Measure the tallest, widest and longest item including any tray. The side-seal frame is effectively unlimited in length, but the seal bar and tunnel opening set the width and height; the BTH-700/BM-700 is the wide frame.
POF, PE or sleeve film?
POF is the clear, thin, retail-friendly film for single boxes and bundles. PE is thicker and stronger for heavy multi-packs and tray packs. A sleeve is a band of PE that is left open at the bottom for bottled water and cans — choose the BTX for that.
Side-seal or L-seal?
Variable-length and long products point to a continuous side-seal BTH/BTA. Uniform rectangular packs at high speed are the classic automatic L-sealer application (BTS). Side-seal is more flexible; L-seal is simpler for a single product.
Manual, automatic or inline?
A chamber or small L-sealer suits batches; the BTH and BTS are automatic wrappers with a film feed that runs continuously; if the wrapper is part of a collating line, confirm the in-feed and the way trays are presented.
Tunnel capacity and dwell time
The BM tunnel is sized to the sealer — width, height, belt speed and heat must match the film and the pack mass. A heavy multi-pack needs a longer tunnel or a slower belt; a light POF pack needs a quick, even pass.
Pack presentation and printing
For retail shelf appeal, POF with a high-clarity film and a side-seal that hides the seam matters. For logistics, clear PE and a functional seam are enough; printed film needs a register and servo feed.
Where shrink wrapping is used
The same machines are sold for retail presentation and for distribution protection; the film and tunnel settings differ even when the hardware does not.
Related buying guides
- Heat shrink wrapping machine buying guide: L-bar, side-seal and sleeve
- Shrink wrapping machine: L-bar, side seal and sleeve (2026)
- L-bar sealer buying guide: manual, semi-auto and auto
- Shrink wrapping tunnel: L-bar vs side-sealer sizing
- Best shrink wrapping machine manufacturers in 2026
- Heat-shrink packaging machine troubleshooting and repairs
Frequently asked questions
What is the difference between shrink wrap and stretch wrap?
Shrink film is loose when applied and is tightened by heat in a tunnel, conforming to a product or tray. Stretch film is pulled and wrapped around a pallet without heat, purely to unitise the load. If you are wrapping a single product or tray, it is shrink; if you are securing a pallet, it is stretch.
Which film should I use, POF or PE?
POF is a thin, clear, food-contact film suited to retail single packs and small bundles. PE is thicker, stronger and cheaper per pack for heavy multi-packs, bottles and trays on the BTH/BTX machines. Tell us the product weight and whether it is for retail or distribution and we will recommend the film.
Do I need a side-seal machine or an L-sealer?
Variable-length products and long bundles favour the continuous side-seal BTH/BTA because it is not limited by a seal-bar length. Uniform boxes and rectangular packs at high speed are a natural fit for an automatic L-sealer BTS. If you run a single product in high volume, the L-sealer is straightforward; if lengths vary, choose side-seal.
Will one heat tunnel handle every product?
The BM tunnel must be matched to the pack’s size, mass and film. A small fast pack and a large slow tray need different tunnel openings, belt speeds and dwell times. The configurations below are matched sealer-and-tunnel pairs precisely to avoid under-heating or scorching.
Can the machine run printed film?
Yes, with servo-controlled film feed and a register to align the print, which can be specified on the automatic range. Plain film is the default; send the repeat length of the printed artwork when requesting a quote.
Tell us the product and the film
Send the pack dimensions, weight, film type (POF/PE/sleeve) and required packs per minute. We will match the sealer to the right BM heat tunnel and give you an export price.
Which Shrink Wrapping Solution Fits Your Line?
Compare sleeve, tunnel, and L-bar options by product type, speed and film budget.
| Scenario | Products | Output | Recommended Type | Key Features | Film Type |
|---|---|---|---|---|---|
| Bottled drinks / cans | Bottles, cans, multipacks | 30-80 packs/min | Continuous sleeve wrapper + heat tunnel | Auto product infeed, shrink tunnel, shrink film | PE shrink film 45-60µm |
| Food trays / fresh produce | Trays, boxes, cartons | 15-40 packs/min | L-bar sealer + shrink tunnel | Manual/semi-auto, small footprint | POF shrink film 15-30µm |
| Construction materials | Bricks, blocks, bags | 5-20 packs/min | Heavy-duty sleeve wrapper | Reinforced frame, heavy film, hot tunnel | PE thick film 80-120µm |
| E-commerce bundles | Mixed cartons, bags | 10-30 packs/min | Side-seal wrapper + tunnel | Variable film width, random product height | POF/PE blend |
| Pharma / cosmetics | Small boxes, blister packs | 30-60 packs/min | High-speed L-bar + small tunnel | SS304, dust-tight, print registration | POF 12-20µm |
| Palletized bulk | Pallets of bags/boxes | 2-8 pallets/hr | Pallet shrink wrapper (turntable) | Top sheet dispenser, film prestretch | PE stretch film 170-230% |
| Bakery / snacks | Bread, bags, multipacks | 40-100 packs/min | High-speed side-seal wrapper | Dust extraction, cleanroom, film splice | PE microfilm 30-40µm |
Shrink Tunnel Temperature & Speed Guide
| Film Material | Gauge | Tunnel Temp | Conveyor Speed | Shrink Result | Typical Products |
|---|---|---|---|---|---|
| PVC | 30-50µm | 140-160°C | 6-10 m/min | High clarity, brittle | CD/DVD, small boxes |
| POF (polyolefin) | 15-30µm | 160-180°C | 8-12 m/min | Strong, crystal clear | Food, cosmetics, books |
| PE (polyethylene) | 45-120µm | 180-220°C | 4-8 m/min | Tough, less clear | Bottled drinks, bricks, cans |
| PP (polypropylene) | 20-40µm | 150-170°C | 8-14 m/min | Very clear, stiff | Textiles, folders |
| PETG | 20-50µm | 170-190°C | 6-10 m/min | Premium clarity, eco | Luxury goods, pharma |










