SUNAURA MACHINERY BLOG

SunAura Adds CIP-Ready Hygienic Filling Modules with Clamp-Connected Product Paths for Dairy, Sauce and Beverage Lines

SunAura Adds CIP-Ready Hygienic Filling Modules with Clamp-Connected Product Paths for Dairy, Sauce and Beverage Lines

SunAura Machinery has extended its liquid filling platform with a second engineering generation built around clean-in-place (CIP) readiness and clamp-connected product paths. The new modules sit alongside the existing welded-pipe frames rather than replacing them, and the difference is not cosmetic: it changes how a line is cleaned, how long a product changeover takes, and which buyers should pay for the upgrade.

The trigger for the change came from application files rather than from a product roadmap. Three dairy and sauce projects in the past year stalled at the same point in the audit: the filling line could reach the required output and accuracy, but the customer’s quality team could not sign off a product path that could only be cleaned by dismantling welded spools. Two of those projects eventually bought elsewhere. The new generation exists so that the third one does not.

What actually changed in the new modules

Four engineering decisions define the generation, and each of them is a trade rather than a free improvement.

Clamp connections instead of welded spools. Product contact piping now uses sanitary tri-clamp joints with validated gaskets, so a product changeover that used to require a fitter and a spanner set becomes a 15–25 minute wet changeover performed by the line operator. The cost is more joints to inspect and a gasket register to maintain.

Full-drain geometry with 3° slope and bottom-side outlet. Every product vessel drains to a single low point, and the filling head sits above the drain so residue cannot pool after CIP. This removes standing product in dead legs but adds roughly 8–12% to vessel fabrication cost compared with a flat-bottom tank.

CIP return routed at the filling nozzles, not only at the tank. Return lines are installed at the highest nozzle in each filling head group, which lets rinse and detergent reach the nozzle bore and the valve seat at flow velocity rather than by splash. On a 12-nozzle head this typically means 2–4 additional return drops.

Surface and slope discipline on the frame. Frame tubes are sealed, the machine bed slopes to a drain, and the electrical cabinet is rated for washdown spray from the front only. The frame is not a full washdown enclosure; buyers who need high-pressure foam cleaning from every angle still have to specify the higher enclosure option.

Automatic inline liquid filling machine with stainless steel frame and sanitary product path
The hygienic generation keeps the same filling head architecture but replaces welded product spools with clamp-connected, fully drainable paths.

Where the new generation sits against the alternatives

Three options are realistically on the table for a buyer who needs a cleanable filling line: keep the standard welded-pipe frame and clean by disassembly, specify the new CIP-ready hygienic frame, or buy a fully enclosed aseptic or ultraclean skid. They solve different problems and are priced accordingly.

Purchase comparison by cleaning requirement

CriterionStandard welded-pipe frameCIP-ready hygienic frame (new)Enclosed aseptic / ultraclean skid
Product pathWelded spools, fixed runsTri-clamp joints, drainable geometryFully welded, sterile boundary with SIP
Cleaning methodManual disassembly, rinse by handRecirculated CIP, wet changeover by operatorCIP plus SIP with validated sterilisation
Changeover time90–180 min with a fitter15–25 min, operator only60–120 min including sterilisation cycle
Typical output2,000–12,000 bottles/h2,000–12,000 bottles/h4,000–20,000 bottles/h
Filling accuracy±0.5–1% (piston or flow meter)±0.5–1%, unchanged±0.3–0.5% with mass-flow control
Product scopeAmbient stable liquids, short shelf lifeDairy, sauces, beverages, cosmetics with 7–45 day chilled or ambient lifeUHT dairy, pharmaceuticals, low-acid beverages
Hygiene documentationMaterial certificates onlyMaterial certs, gasket register, drainability and CIP coverage reportFull validation pack incl. SIP lethality and media fills
Site requirementStandard utilitiesCIP skid, 3-phase steam or hot water, drain in floorCIP/SIP skid, cleanroom class, validated water
Price band (indicative)USD 28,000–70,000USD 38,000–95,000USD 150,000–400,000
LimitationCannot pass a hygiene audit on long shelf lifeNot fully enclosed; gasket discipline requiredCost and infrastructure; slow changeover
Indicative bands for a 6–12 nozzle filling head. Final price depends on nozzle count, CIP skid scope and enclosure rating.

Which buyer the new generation is for

The upgrade pays for itself in a specific band of situations, and it is the wrong purchase outside that band.

Choose it when the product is a dairy, sauce, dressing, juice or cosmetic emulsion with a chilled shelf life of 7–45 days and more than two product changeovers per week; when the buyer’s quality team works to a HACCP or FSSC-style plan that requires documented cleaning of product contact surfaces; or when the line has to switch between, say, a 3.5% fat yoghurt base and a fruit-containing dessert within the same shift.

Do not choose it when the product is a stable ambient liquid such as a clear cosmetic alcohol, a household cleaner or a lubricant, where welded pipe is accepted and changeovers are monthly; when output is under 2,000 bottles per hour and the line runs one SKU; or when the real requirement is sterility rather than cleanability, in which case the enclosed aseptic skid is the correct answer and a hygienic frame alone will not satisfy the audit.

The middle case is the common one. A co-packer running four sauces at 6,000 bottles per hour with weekly changeovers does not need sterility, but does need wet changeover in under 30 minutes. That is precisely where the new frame is cost-effective: it removes a fitter from the changeover and lets the quality team sign the cleaning record.

What the buyer must prepare before quoting

Six inputs determine whether the hygienic frame is justified and how it is configured: product family and pH, shelf life and distribution temperature, number of SKUs and changeovers per week, target output in bottles per hour and bottle neck format, available utilities for CIP (skid capacity, hot water or steam, floor drain, detergent compatibility), and the hygiene standard the customer’s own audit follows. Supplying these six turns the quotation into a specification rather than an equipment list.

What the change means for existing lines

Owners of the welded-pipe generation are not stranded. Nozzle assemblies, filling heads and the control architecture are shared, so a line can be converted in stages: clamp spools and drainable vessels first, CIP return drops at the filling head second, and frame and cabinet upgrades last. A staged conversion avoids a full rebuild while still moving the audit position forward each quarter.

The modules are listed under liquid filling machines, and how they integrate with capping, labelling and packing is set out under packaging lines. Material and welding documentation for the hygienic generation is filed under certifications and patents, and site photographs of installed dairy and sauce lines are collected in the workshop gallery. Buyers who want a hygiene audit checklist mapped to their own standard can request it through the contact form; commissioning support and CIP validation are covered by the after-sales programme.

Why this is an engineering release rather than a model refresh

Model refreshes change paint, guarding and the HMI layout. This release changes what the machine can be audited for, which is the part buyers actually pay for in dairy and sauce projects. The limitation is equally clear: a hygienic frame is not a sterile frame, and any project where the shelf life depends on sterility should be specified as an aseptic skid from the start rather than upgraded later.

We use cookies to improve your experience on our website, analyze traffic, and personalize content. By browsing this website, you agree to our use of cookies. Learn more