SUNAURA MACHINERY BLOG

SunAura Commissions a Pre-Made Pouch Filling and Sealing Line for a Thai Ready-to-Cook Curry Paste Producer

Pre-made pouch filling and sealing line
Curry paste looks like a simple viscous product to pack, but its 20,000+ cP viscosity, oil separation and zipper-pouch requirement change the filling and sealing choice. A thin-liquid flow filler would string between pouches and a rollstock FFS machine would not support the zipper.

SunAura Machinery has commissioned a pre-made pouch filling and sealing line for a Thai ready-to-cook curry paste producer in Chiang Mai. The customer packs 200 g and 500 g red, green and massaman curry pastes in stand-up zipper pouches for supermarket retail across Thailand and export to the Gulf. The project replaced a semi-automatic tabletop piston filler that ran at 6 pouches/min, had stringing between fills, and could not zip seal consistently.

A rollstock form-fill-seal (FFS) machine would have looked cheaper, but it would have failed on three points: it cannot support a reclosable zipper, it struggles with high-viscosity paste without stringing, and it cannot run the customer’s pre-printed pouch graphics. This line was specified around paste-and-zipper reality.

Why Pre-Made Pouch — Not Rollstock FFS

Thai curry paste is a high-viscosity, oil-and-water emulsion. It needs a positive-displacement piston fill, not a gravity or flowmeter fill. It also needs a reclosable zipper for retail. Rollstock FFS forms a bag from a flat film roll and cannot add a zipper; pre-made pouch machines open a pre-zippered pouch, fill it and seal it. That is why this customer chose pre-made despite the higher per-pouch film cost.

DimensionRollstock FFSPre-Made Pouch (this line)Why it matters
Reclosable zipperNot supportedStandardRetail customers expect a reclosable pouch
SpeedUp to 60 pouches/min20–40 pouches/minThis customer needs 25 pouches/min, not 60
Film waste at changeover10–20 m web5–10 pouchesLess waste on multi-SKU
High-viscosity fillPossible but stringing-pronePositive-displacement piston, anti-drip nozzleCurry paste does not string between pouches
Printed pouch graphicsPrint registration requiredPre-printed pouches acceptedBrand graphics land exactly on the pouch

Two Paste-Specific Details That Decide Quality

Heated piston cylinder with anti-drip nozzle. Curry paste thickens as it cools. The piston cylinder runs jacketed at 45–50 °C to keep the paste fluid, and the nozzle cuts off cleanly with a suction-back so it does not drip onto the pouch seal. Without anti-drip, the seal is contaminated and the pouch leaks on the shelf.

Zipper seal jaw with independent temperature control. The zipper area of a stand-up pouch needs a lower seal temperature than the pouch back-seal; too hot and the zipper melts, too cold and it does not zip. The line runs two independent seal jaws — one for the pouch top, one for the zipper.

Servo piston filler for thick pastes
Thick paste needs a positive-displacement piston, not a gravity or flowmeter valve. The deciding factor is not top speed but anti-drip, jacketed temperature and whether the piston can handle 20,000+ cP without stringing.

Who This Line Suits — and What We Would Specify Differently

This configuration ready-to-cook pastes, sauces and marinades at 15–35 pouches/min running 200–1000 g stand-up zipper pouches. Buyers above 50 pouches/min on a single SKU are better served by rollstock FFS (and give up the zipper). Buyers below 10 pouches/min are better served by a tabletop piston filler. For thin liquids (juice, water), a flowmeter or overflow filler beats a piston.

The line passed FAT at our Qingdao workshop with the customer’s actual curry paste, checked fill weight and seal integrity across a full run, and shipped with spare seals, piston cups and commissioning support covered under our after-sales service terms. For more on filling principles, see liquid filling machines.

Packing thick pastes, sauces or marinades in zipper pouches? Send your product viscosity, pouch size and pouches/min to [email protected] or on WhatsApp. We will tell you whether pre-made pouch or rollstock FFS pays back for your SKU mix. Browse our integrated lines and other commissioning news.

We use cookies to improve your experience on our website, analyze traffic, and personalize content. By browsing this website, you agree to our use of cookies. Learn more